Exercise Swim Spa Packages

 Description:

 This pool is a stainless-steel watertight shell made from 316 Grade stainless steel; it is free standing self-supporting, suitable for a range of installation types. The pool is suitable for above, below, or semi sunken. 

Construction: 

The pool is fully insulated and sits in its own stainless steel 304 grade framework structure. The stainless-steel shell, 25mm insulation and framework is accompanied by a pressure fit ledge surround around the top perimeter of the pool 200mm, finished with stainless steel moulding. 

Water Testing:

The pool includes full water testing and certification upon request (this may be in the form of a water test video or paper / verbal confirmation it has passed the water testing stage).  

Fittings inside your pool: 

Circulation Fittings: Stainless Steel Inlets & Outlets and Skimmer. Lighting Fittings:1 x Large Stainless Steel LED Light fitting. Swim Jet Fittings: 1 x Swim Jet Interface and suctions. Seating Feature: 1 x Stainless Steel Bench  

 Pool Installation:   

After your order has been placed, on your design consultation you will discuss options with customer care about the location of your equipment. Please always seek advice and read the groundworks manual to understand the options available to you (as it will vary customer to customer depending on your planned installation type, and any modifications made to equipment specifications). 

Equipment Location:

The equipment can either be located: 

1) on site in a location prepared by yourself or 

2) within the pool in a ‘bump out’

Equipment Included

The equipment included in the exercise swim spa is:

1 x Circulation Pump with strainer basket 0.75HP

1 x UV Light system

1 x Electric Heater 3KW

1 x Cartridge Filter

1 x Lights Transformer

1 x RGB Light 

8 x Massage Jets

4 x 3hp swim jet pumps

5 x on/off Buttons with connection boxes

Electric heating vs Alternative Source

Our pools come with standard electric heating, However, if you have your own heating preferences such as Air source heating, solar heating, heating from your boiler please let us know. 

Warm all year round

  Once your pool is turned on, your pool installation will enable your pool to maintain itself, keeping the water at a constant set temperature, which you can set on the thermostat. 

Set your Temperature

For a swimming pool this is normally between 28 and 32 degrees, and for a hot tub this is around 38 degrees. You may wish to set the temperature of your pool to a pool temperature or a hot tub temperature (Please note a hot tub temperature is only possible with a hot tub cover vs a pool cover). 

Sand Filter Vs cartridge Filter

Our pools come with standard cartridge filters, that work in conjunction with UV light technology to kill bacteria. However if you would like to change to a sand filtration system please let us know.  Which ever system you chose the water will be cleaned constantly in your circulation system, and only needs changing every 6-12 months. 

UV Light Technology:

UV light technology is especially effective in a stainless-steel pools, as stainless steel is naturally sterile, the bacteria cannot stick to the sides of the pool, this means that bacteria is free floating in the water, and the UV light can kill a much higher percentage of bacteria vs a fiberglass pool / concrete / tile etc. 

Chemicals:

We do still advise however the use of some bromine in your pool, which can be put into a floating device to constantly dispense into the water. However, you will find that the pool is less dependant on chemicals can independently self-clean to a better standard / rate than other types of pools.

  Compact Size:

Your swim spa can be small and compact in size and still offer yourself and family all the benefits of a large swimming pool. 

The smallest swim spa size recommended is internally 1.8m x 3.5m x 1.2m (2.2 x 3.9 x 1.3m). This is smaller than our standard size swim spa which is internally 2.4m x 4.8m x 1.2m (2.8m x 5.2m x 1.3m externally).  

Your swim spa will be made to order, and we can work to your size requirements, and recommend and advise you along the way.  

   Large Size:

If you wish to have your swim spa larger than standard for some extra splash around space, this is no problem. 

Our standard size is  internally 2.4m x 4.8m x 1.2m (2.8m x 5.2m x 1.3m externally) however you can make your pool longer and wider depending on preference. Our swim spas can be as large as 3.6m x 10m.

Your swim spa is made to order, and we can work to your size requirements and recommend and advise you along the way. 

Our swim spa package includes our stainless steel exercise swim jet system with 3 speeds. However, you may chose to not have a swim jet at all, or request an alternative model such as the endless pools fast lane swim jet system. 

Our swim spas as standard come with a stainless steel optional bench at one end and massage jets. However, you may wish to add in extras features such as corner steps, corner seats. roman end steps, waterfalls and more. Contact us to discuss the extra options available.

 Our exercise swim jet is made from marine grade stainless steel and integrated seamlessly into your pool wall. The model swim jet is powered by 4 swim jet pumps, and offers 3 speeds for swimming. You will have electric LED buttons installed into the ledge of your spa to control the speed. This model swim jet is ideal for recreational swimmers, looking for endurance work outs and family fun.

The endless pools fast lane swim jet, is retro fitted to the pool, and protrudes out into the water. The swim jet operates through a propeller system, vs pump system. The swim jet offers 52 speeds, and is controlled from a remote control. This swim jet is suitable for serious swimmers, competitive swimmers or those with disabilities or injuries.